Prodaso. Older machines can produce data too.
Prodaso is Forterro’s AI-supported IIoT platform. It connects new and older machines and manual workstations to the network; it collects production data in the cloud and turns it into real-time insight and predictions.
A five-step flow: machines (new, older and manual stations) → IIoT module (machine to data) → cloud platform (data to insight) → AI (prediction and optimisation) → abas ERP (through the Prodaso Connector). The flow returns to the start with the observe, understand, act cycle.
Fact sheet
- MES & IIoT · Production data and manufacturing intelligence
- Forterro · Prodaso GmbH, Bielefeld (part of Forterro since June 2024)
- Mid-sized industrial manufacturers
- IIoT module, retrofit and additional sensors; older machines and manual stations included
- Cloud · no local IT installation required
- abas ERP · Prodaso Connector
- Factory Innovation Award 2026 · bronze in the Manufacturing BI & Analytics category
02Who it is for
Mid-sized industrial companies producing with a mixed machine park.
Forterro positions Prodaso for mid-sized manufacturers that want to digitalise their production by connecting their machines. No employee or revenue threshold is defined for the product; what decides is the need to collect reliable, continuous data from the shop floor.
03Which business problems it solves
The machine is running; the data stays off the record.
The improvement areas Prodaso targets: OEE and machine availability, unplanned downtime, scrap and rework, process stability, response time, delivery and planning reliability, early warning. Their common root is that data does not arrive from the shop floor on time and in full.
Three layers and the result: availability (for how much of the planned time the machine ran without downtime), performance (how fast production was against the target speed), quality (how many of the parts produced were good). OEE is the product of the three; according to Forterro, 80% and above is good, and a common value is around 60%.
04Core capabilities
From machine to data, from data to decision.
Connection regardless of make and age
The IIoT module and dedicated hardware and interface solutions connect machines regardless of their make and age. Additional sensors can be fitted to machines that do not give enough signals; older equipment joins the data stream through retrofit.
Status data independent of the operator
Whether a machine is running, stopped or in setup, together with additional process parameters, is collected without depending on operator input. Forterro calls this step «machine-to-data».
Visibility from the whole plant down to a single work step
A current view of production as a whole and of every step; access to data from any location. OEE and performance indicators stay up to date continuously.
A virtual model of machines and processes
Machines and processes are monitored in real time through a virtual model. Workflows, potential failures and areas for improvement become visible; automatic notifications are sent at critical parameter thresholds.
Downtime, OEE, time, reject and anomaly analysis
Downtime, OEE, production time, reject rate, process parameters and anomalies are monitored with live dashboards and configurable indicators.
Order visibility and paperless work orders
Orders are visualised from machine level up to the whole of production. The plan is optimised for capacity fluctuations, order information reaches the operator without paper, and delays are reported.
Automatic data exchange between the shop floor and the ERP
Data exchange with abas ERP runs automatically; manual entry and the risk of error that comes with it are eliminated. Systems such as CAQ, MES and EMS can also be connected to the platform.
05How it works
Observe, understand, act.
The working model rests on a three-step cycle: observe, understand, act. Machines are connected and data is collected in the cloud; analyses and AI turn this data into recommendations and predictions.
1. Connect the machines · 2. Collect the data in the cloud · 3. Turn data into insight · 4. AI produces predictions · 5. Extend the scope
06Modules and functional areas
Six functional areas, two connection components.
Forterro does not publish a module or package list for Prodaso; the scope is set at proposal stage. Below are the six functional areas from the abas solution page and the two components that run on the shop floor and on the ERP side.
- Flexible machine connectionConnecting machines and systems, paperless production
- Digital twinA real-time virtual model of machines and processes
- Precise analysesDowntime, OEE, time, reject and anomaly analyses
- Artificial IntelligenceAlgorithms and prediction models specific to the use case
- Intuitive production planningOrder visualisation, plan optimisation, delay alerts
- Real-time transparencyOEE and performance indicators up to date at all times
- IIoT-ModulThe connection component on the shop floor; works with additional sensors and retrofit
- Prodaso ConnectorInside abas ERP; connects ERP data to the AI functions
07Industries
Not tied to an industry; references from machining and plastics.
Forterro positions Prodaso not for a specific industry but for manufacturing companies with a machine park. The published references include Martin Dellit Präzisionsdreherei, Franz Kunststofftechnik, Heicon and FROHN GmbH, a Sinto Group company.
08Integration and API
Connects to abas ERP through the Prodaso Connector.
Prodaso’s most clearly defined integration is with abas ERP. Systems such as CAQ, MES and EMS can also be connected; however, because the interface documentation is not public, the protocol and machine coverage must be confirmed in writing.
Four sources from the shop floor — machine signals (running, stopped, in setup), additional sensors, retrofitted older machines and manual workstations — come together on the Prodaso cloud platform (IIoT module, digital twin, AI). The platform connects to abas ERP through the Prodaso Connector; CAQ, MES and EMS systems can also be connected.
Prodaso Connector
The Prodaso Connector inside abas ERP connects ERP data to Prodaso’s AI functions. In its 2024.Q3.1 service pack announcement, abas names this component as the core building block of AI integration.
Commercial data in abas, shop-floor data in Prodaso
abas ERP provides the structured commercial, logistics and planning data; Prodaso complements it with production and machine data from the shop floor. The ERP remains the system of record.
CAQ, MES and EMS
Quality management (CAQ), manufacturing execution (MES) and energy management (EMS) systems can also be connected. A published customer example reports that the existing MES infrastructure noticeably reduced the commissioning effort.
Standard interfaces, written confirmation
The same example states that the integration was built with standard interfaces. The API, the protocols (e.g. OPC UA, MQTT) and the list of supported machines are not public; this information should be requested in writing before the proposal.
From shop-floor data to APS
In its acquisition announcement, Forterro stated that combining Prodaso’s technology with its existing solutions would bring innovation to the APS area. Carrying real shop-floor data into planning should be addressed separately at companies that use abas APS.
09AI and automation
Patterns, anomalies and predictions; the decision stays with people.
Prodaso uses advanced models and algorithms specific to the use case to reveal hidden patterns and inefficiencies in production data. Forterro positions Prodaso as its centre of competence for industrial AI and IoT. Because the model types are not described in detail, critical scenarios should be tested in a pilot.
Ready-to-use predictive models
Pattern and anomaly detection is automatic; multi-parameter correlation analyses make cause-and-effect relationships visible.
Parameter monitoring and process stability
Process parameters are monitored with AI support; predictive early warning makes it possible to intervene before a deviation grows.
Improving master data
AI-supported master-data optimisation aims to make planning more reliable.
Predicting quality and failure probability
abas and Prodaso are working together on predictions of quality development and of the failure probability of production equipment. According to abas, the first solutions in live use have been integrated into the ERP.
abas’s framing is clear: AI does not replace human judgement, it supports it. The customer result ranges Forterro publishes are not given together with a measurement method; targets should be set against your own baseline measurement.
10Deployment · security · releases
A cloud solution with nothing to install.
Prodaso is delivered from the cloud and requires no local IT installation. Because hosting and security details are not public, the items below must be confirmed in writing before purchase.
11Decision criteria
Where it is a strong candidate.
The criteria below are derived from Prodaso’s published capabilities; whether they hold for your production is tested with evidence in Assess.
When it is a strong candidate
Whether MES & IIoT is the right category, and whether Prodaso covers your machine park, is established with evidence in Assess.
12Questions
Frequently asked before a decision.
Answers about the product rest on the vendor’s official sources; for the current state, see the sources section.
Yes. Prodaso is designed to connect different equipment, from modern machines to older systems and manual stations, with retrofit and additional sensors. One published example features a manufacturer whose oldest machine was built in 1994; on some machines that did not provide enough data, the signals had to be extended.
No. Prodaso is an AI-supported IIoT platform that works in the area of machine data, real-time production monitoring and analysis. The ERP remains the system of record for orders, stock and cost; Prodaso complements these records with data from the shop floor.
Prodaso has been part of Forterro since June 2024 and sits in the same product family as abas ERP. On the abas side, the connection is made by the Prodaso Connector. The technical scope of the integration is determined separately in the project; this page gives no integration commitment.
The hosting location and security certifications do not appear in public sources. This information should be requested from the vendor in writing before the proposal; MindDX includes this item in the Assess scope.
OEE is the product of availability (run time without downtime), performance (production speed) and quality (share of good parts). According to Forterro’s OEE source, 80% and above is a good value; in production, the value often stays around 60%.
According to abas, Prodaso analyses downtimes, OEE, production times, rejection rates, machine parameters and anomalies. Its AI algorithms detect patterns and anomalies and run multi-parameter correlation analyses.
In Prodaso, the digital twin is a virtual model of the machines and processes: production is monitored in real time and possible faults are spotted before they grow. Automatic notifications are sent when critical parameters are reached.
According to abas, Prodaso works integrated with abas ERP, and other systems such as CAQ, MES or energy management (EMS) can also be connected. Automated data exchange between the systems reduces manual data entry.
According to Forterro, stoppages for maintenance, breakdowns and setup reduce availability; slower running and short stops reduce performance; scrap and rework reduce quality. Because OEE is the product of the three factors, every loss shows directly in the result.
Forterro offers an OEE and ROI calculator that uses production figures such as the number of machines, operating and downtime, quantities, scrap rate and costs to work out the current OEE and how improvements affect the return on investment. Scenarios can be compared; the results are an estimate.
As a Prodaso partner, MindDX sells licences and provides implementation services. Assessment, design, integration scoping, training and support are also among the roles it can take on; which of them it takes on in your project is written explicitly into the proposal, together with the validated scope.
This page gives no product price, licence, edition fee or duration. They are shared by a consultant after the scope has been validated.
13Related content and sources
Related solution categories
Related insights
All insightsSources and verification
14How to start with MindDX
The road to this product does not start with the product.
The MES & IIoT decision is made in your processes, not in a demo. Assess shows, with reasons, whether the need is met by standard capability and settles what changes, why and in which order as a validated scope; the implementation proposal comes out of that scope.
As a Prodaso partner, MindDX sells licences and provides implementation services. Which roles MindDX takes on in your project — licence, assessment (Assess · Checkup / Discover / Audit), fit / gap analysis, solution design, implementation, integration scoping, process redesign, training and support — is written explicitly into the proposal, together with the validated scope.
Prodaso is not a MindDX Platform module and there is no technical integration between the Platform and Prodaso. The Platform governs selection and readiness with evidence: assessment, requirements, evidence, BPMN design and decision → design → test → acceptance traceability.
MindDX Platform

